H1 / AS1 · Sixth Edition · Calculation Method

Lodge your H1 schedule right the first time.

Upload your drawing set. ConsentIQ pre-fills the construction R-values, you confirm the assumptions and enter the areas, and it produces a lodge-ready schedule. Schedule Method removed 27 November 2025 — Calculation Method only.

1 · Start

2 · Confirm

3 · Result

Project

Project address

Client name

Designer / practice

Climate zone

Envelope scope

Confirm the Climate Zone yourself — NZS 4218 Zones don't follow council boundaries.

Drawing set PDF

Drop PDF here or click to browse

Multi-sheet drawing set — sections, elevations, window schedule

The parse reads construction R-values off your sections and specs — the part it's reliable at. You'll enter the areas yourself on the next step (floor and wall areas are the part automated extraction gets wrong, so we don't guess them).

Construction R-values parse · confirm

Green = read straight off your drawings (source shown). Amber = an assumption or conservative default — each needs an individual tap to accept. Red = not found — pick a standard build-up or type the value.

Amber assumptions and red gaps are never swept by this — accept them one by one.

Areas — you enter these not parsed

Measured to the finished internal face (para 2.1.2.10). Net wall is derived for you.

Floor type

Floor type drives the reference-building floor divisor (Table 2.1.2.7). Slab-on-ground and suspended floors are referenced differently — picking the wrong one is the single biggest source of false fails on slab homes.

Floor area (m²)

Gross wall area (m²)

Total glazing (m²)

Opaque door area (m²)

Skylight area (m²)

Net roof area (m²)

Net wall area (m²) — derived

Net roof = internal ceiling area of the thermal envelope (excludes an unconditioned garage; differs from the slab footprint on two-storey or garaged homes). Defaults to floor − skylight if left blank.

Roof has a compressed ceiling perimeter at a lower R-value

HL proposed

—

HL reference

—

Margin

—

Heat loss breakdown

Element	Area (m²)	R-value	A/R (W/K)	Share

Minimum R-value checks (para 2.1.2.11)

Sensitivity analysis

Lodge-ready H1 schedule

Builds a lodge-ready H1 schedule from your confirmed values — preview below, download as PDF.

The H1 schedule is one item a BCO checks. ConsentIQ catches the rest of your likely RFI triggers — missing specs, producer statements, clause gaps — against what your council actually asks for, before you lodge.

H1 Calculator